| DSZ2、DSZ3可用于國家的二、三、四等水準測量及地形、工程、礦山水準測量,DSZ2加FS1可用于國家一、二等水準測量和沉降變形及免出差錯。儀器可在-30℃—+50℃環境下使用。 | DSZ2 DSZ3 are used in3rd and 4th order leveling and in geodetic control,construction of roads and industrial applications,The DSZ2 with FS1 maybe used in 2nd order leveling or in monitoring structural deformation etc.The use lr autonatic compensator speeds up work and improves accuracy.They can be operated in the temperature from -30℃ to +50℃. |
| 大家都知道補償器是由金屬材料和玻璃材料組成,而這些材料受到溫度的影響,會(huì )引起補償器微量的變化,從而導致i角的變化。未經溫度補償的儀器,往往滿足不了國家標準的GB/T 10156-4997的要求。下圖中紅線邊界內綠**域為溫度變化時補償器變化的合格區域(企業標準規定:±0.5″/攝氏度)。圖中紅色粗曲線內A為未經溫度補償的水準儀i角變化曲線。DSZ2已加有溫度補償裝置,利用溫度補償裝置對i角隨溫度的變化量進行修正,如圖中綠色粗線B為經補償后的i角的變化曲線,從而使儀器在溫度變化較大的惡劣條件下也能滿足使用要求,對長時間的變形觀測尤為適用。 | ![]() |
| 儀器型號 |
DSZ2+FS1 |
|||||
| 每公里往返測量標準偏差 |
|
|||||
| 放大倍率 |
32× |
|||||
| *短視距 |
1.6m |
|||||
| 補償工作范圍 |
± 14′ |
|||||
| 補償安平精度 |
≤±0.3″ |
|||||
| 儀器重量 |
2.5kg |